View MSM64152A_117951.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

E2E0028-38-95
Semiconductor MSM64152A/64152AL
Semiconductor
This version: Sep. 1998 MSM64152A/64152AL Previous version: Mar. 1996
4-Bit Microcontroller with Built-in LCD Driver and Melody Circuit
GENERAL DESCRIPTION
The MSM64152A (1.5 V)/64152AL (3.0 V) is a high-performance 4-bit microcontroller that incorporates Oki-original CPU core nX-4/20. The MSM64152A/64152AL has an LCD driver for up to 104 segments, an event counter, and a melody circuit. It is best suited for applications such as clocks and LCD games.
FEATURES
* Operating range Operating voltage Operating temperature Operating frequency
: 1.5 V/3.0 V : -40 to +70 C : 32.768 kHz crystal oscillation Approx. 32 kHz RC oscillation Supply current (Typ.) : 0.9 mA (3.0 V at HALT mode) * Minimum instruction execution time : 91 ms * General memory space : 1504 bytes * Local memory space : 128 nibbles * LCD driver : 30 Common driver 4 Segment driver 26 1/4 duty, 1/3 bias; 104 segments (26 4) 1/3 duty, 1/3 bias; 78 segments (26 3) * I/O port Input-output port : 1 port 4 bits (open-drain output/CMOS output selectable; pull-down resistor input/high-impedance input selectable) Input port : 1 port 4 bits (pull-down resistor input/high-impedance input selectable) Output port : 1 port 4 bits (CMOS output) * Event counter : 1 channel * Melody output :1 * Interrupts : 7 sources External 2, time base 4, melody 1 * Package: 60-pin plastic QFP (QFP60-P-1519-1.00-K) : (Product name : MSM64152A-GS-K, MSM64152AL-GS-K) Chip : MSM64152A-, MSM64152AL- indicates a code number. * OTP version (for program evaluation) : MSM64P155/64P155L (The package, power polarity, and operating voltage of the MSM64P155/64P155L are different from the MSM64152A/64152AL. For details, refer to the "MSM64P155 User's Manual".)
1/25
Semiconductor
MSM64152A/64152AL
BLOCK DIAGRAM
C2 C1 VSS3 VSS2 VSS1 COM4 COM3 COM2 COM1
COM DRV
BIAS
SEG0 LCD DRV SEG25
BSR
TR2
TR0 (4)
PCM PCL
TR1 PCH A8 to A11 A7 to A0 RAM 128N (8)
C
ALU
PORT ADDRESS
ROM 1504B
HALT
MIEF
B
A
(4)
(4)
H
L
X
Y
LCD CNT
DB7 to DB0 OSC0 OSC1
TIMING CONTROLLER
SP
ROMR
OSC
INTC
DSPR
IR DECODER
IR
RESET TST1 TST2 TST3 VSSL
RST
TBC
(8) MD0 MD0 MD0
TST
PORT ADDRESS DB7 to DB0
VR
BUP
CAPR
PORT2
PORT4
PORT6
P2.0 P2.1 P2.2 P2.3
is the CPU core (nX-4/20).
P4.0 P4.1 P4.2 P4.3
P6.0 P6.1 P6.2 P6.3
VDD
2/25
Semiconductor
MSM64152A/64152AL
PIN CONFIGURATION (TOP VIEW)
56 RESET 55 TST1
48 OSC1 47 OSC0
46 VSSL 45 VSS1 44 VSS2 43 VSS3 42 C1 41 C2 40 COM1 39 COM2 38 COM3 37 COM4 36 SEG0 35 SEG1 34 SEG2 33 SEG3 32 SEG4 31 (NC)
54 TST2 53 TST3
60 P4.0 59 P4.1
58 P4.2 57 P4.3
52 P2.0 51 P2.1
P6.3 P6.2 P6.1 P6.0 MD0 MD0 VDD SEG25 SEG24
1 2 3 4 5 6 7 8
9 SEG23 10 SEG22 11 SEG21 12 SEG20 13 SEG19 14 SEG18 15 (NC) 16
SEG17 17 SEG16 18
SEG15 19 SEG14 20
SEG13 21 SEG12 22
(NC) 23 SEG11 24 SEG10 25
SEG9 26 SEG8 27
SEG7 28 SEG6 29
50 P2.2 49 P2.3
60-Pin Plastic QFP Note: Pins marked as (NC) are no-connection pins which are left open.
SEG5 30
3/25
Semiconductor
MSM64152A/64152AL
PAD CONFIGURATION
Pad Layout
43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 44 45 46 47 48 49 50 51 52 53 54 55 56 57 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 28 27 26 25 24 23 22 21 20 19 18 17 16
Y
X
Chip Size Chip Thickness Coordinate Origin Pad Hole Size Pad Size Minimum Pad Pitch
: : : : : :
3.90 mm 3.48 mm 350 mm (typ.) Chip center 110 mm 110 mm 120 mm 120 mm 180 mm
Note: The chip substrate voltage is VDD.
4/25
Semiconductor Pad Coordinates
Pad No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Pad Name P6.3 P6.2 P6.1 P6.0 MD0 MD0 VDD SEG25 SEG24 SEG23 SEG22 SEG21 SEG20 SEG19 SEG18 SEG17 SEG16 SEG15 SEG14 SEG13 SEG12 SEG11 SEG10 SEG9 SEG8 SEG7 SEG6 SEG5 SEG4 SEG3 SEG2 SEG1 SEG0 COM4 COM3 COM2 COM1 C2 C1 VSS3 X (m) -1529 -1307 -1085 -863 -640 -418 -196 26 242 459 675 892 1108 1324 1541 1749 1749 1749 1749 1749 1749 1749 1749 1749 1749 1749 1749 1749 1541 1324 1108 892 675 459 242 26 -196 -418 -640 -863 Y (m) -1589 -1589 -1589 -1589 -1589 -1589 -1589 -1589 -1589 -1589 -1589 -1589 -1589 -1589 -1589 -1357 -1140 -923 -706 -490 -273 38 254 471 687 904 1120 1336 1589 1589 1589 1589 1589 1589 1589 1589 1589 1589 1589 1589 Pad No. 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57
MSM64152A/64152AL
Pad Name VSS2 VSS1 VSSL OSC0 OSC1 P2.3 P2.2 P2.1 P2.0 TST3 TST2 TST1 RESET P4.3 P4.2 P4.1 P4.0
X (m) -1085 -1307 -1529 -1749 -1749 -1749 -1749 -1749 -1749 -1749 -1749 -1749 -1749 -1749 -1749 -1749 -1749
Y (m) 1589 1589 1589 1340 1132 924 715 507 299 91 -117 -326 -534 -743 -952 -1160 -1369
5/25
Semiconductor
MSM64152A/64152AL
PIN DESCRIPTIONS
Basic Functions
Function Power Supply Pin 7 45 44 43 42 41 46 Oscillation 47 48 Test 55 54 53 RESET 56 Pad 7 42 41 40 39 38 43 44 45 52 51 50 53 Symbol VDD VSS1 VSS2 VSS3 C1 C2 VSSL OSCO OSC1 TST1 TST2 TST3 RESET Type -- -- -- -- -- -- -- I O I I I I System reset input pin : Setting this pin to "H" level puts this device into a reset state. Then, setting this pin to "L" level starts executing an instruction from address 000H. This pin is internally connected to VSS1 or VSS2 through a pull-down resistor. Description Digital supply voltage(0 V) Digital negative power supply (1.5 V spec.) Bias output for LCD driver (3.0 V spec.) Digital negative power supply (3.0 V spec.) Bias output for LCD driver (1.5 V spec.) Bias output for LCD driver (-4.5 V) For connection to capacitors that generate bias for the LCD driver Negative power supply voltage pin for internal logic (An internally generated constant voltage is present at this pin.) Clock oscillation pins: Either a crystal (32.768 kHz) and a capacitor (10 to 30 pF) are connected to these pins or a resistor (1 MW) is. Input pins for test
6/25
Semiconductor Basic Functions (continued)
Function Ports Pin 52 51 50 49 Pad 49 48 47 46 Symbol P2.0 P2.1 P2.2 P2.3 Type I
MSM64152A/64152AL
Description 4-bit input port (port 2) : Select between pull-down resistor input and high impedance input for each bit with the port 2 control register (P2CON). When configured for secondary functions, an external interrupt and capture circuit trigger input are allocated. If P2.0 to P2.3 are set to "H" level, the IC enters system reset mode. 4-bit output port (port 4) : 4-bit CMOS output port.
60 59 58 57 4 3 2 1 Melody Drivers LCD Drivers 5 6 40 39 38 37
57 56 55 54 4 3 2 1 5 6 37 36 35 34
P4.0 P4.1 P4.2 P4.3 P6.0 P6.1 P6.2 P6.3 MD0 MD0 COM1 COM2 COM3 COM4
O
I/O
4-bit input-output port (port 6) : Select between input and output, between pull-down resistor input and high impedance input, and between open-drain output and CMOS output with the port 6 control register (P6CON). When configured for a secondary function, an external interrupt is allocated. Output pin of melody driver 0 Inverted output pin of MD0 output LCD common signal output pins
O O O O O O
7/25
Semiconductor Basic Functions (continued)
Function LCD Drivers Pin 36 35 34 33 32 30 29 28 27 26 25 24 22 21 20 19 18 17 15 14 13 12 11 10 9 8 Pad 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 Symbol SEG0 SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 SEG7 SEG8 SEG9 SEG10 SEG11 SEG12 SEG13 SEG14 SEG15 SEG16 SEG17 SEG18 SEG19 SEG20 SEG21 SEG22 SEG23 SEG24 SEG25 Type O O O O O O O O O O O O O O O O O O O O O O O O O O
MSM64152A/64152AL
Description LCD segment signal output pins
8/25
Semiconductor Secondary Functions
Function External Interrupts Pin 52 51 50 49 Pad 49 48 47 46 Symbol P2.0 P2.1 P2.2 P2.3 Type I
MSM64152A/64152AL
Description P2.0 to P2.3 secondary functions : These are level-triggered external interrupt input pins. Select interrupt enable/disable for each bit with the P2 interrupt enable register (P2IE). If P2.0 to P2.3 pins are set to "H" level for a minimum of 2 seconds, the device enters system reset mode. P2.0, P2.1 secondary functions : trigger input pins for capture circuit. P6.0 to P6.3 secondary functions : These are level-triggered external interrupt input pins.
4 3 2 1
4 3 2 1
P6.0 P6.1 P6.2 P6.3
I
9/25
Semiconductor Handling When Specific Pins Are Not Used
Symbol TST1 to TST3 Open P2.0 to P2.3 "L" level or open P4.0 to P4.3 Open P6.0 to P6.3 In input mode : "L" level or open (Initial setting: input mode) In output mode : Open Recommended Pin Connection
MSM64152A/64152AL
Open MD0, MD0 COM1 to COM4 Open SEG0 to SEG25 Open
10/25
Semiconductor
MSM64152A/64152AL
ABSOLUTE MAXIMUM RATINGS
1.5 V Spec. (MSM64152A)
(VDD = 0 V) Parameter Power Supply Voltage 1 Power Supply Voltage 2 Power Supply Voltage 3 Power Supply Voltage 4 Input Voltage 1 Input Voltage 2 Output Voltage 1 Output Voltage 2 Output Voltage 3 Output Voltage 4 Storage Temperature Symbol VSS1 VSS2 VSS3 VSSL VIN1 VIN2 VOUT1 VOUT2 VOUT3 VOUT4 TSTG Condition Ta = 25C Ta = 25C Ta = 25C Ta = 25C VSS1 input, Ta = 25C VSSL input,Ta = 25C VSS1 output,Ta = 25C VSS2 output,Ta = 25C VSS3 output,Ta = 25C VSSL output,Ta = 25C -- Rating -2.0 to +0.3 -4.0 to +0.3 -5.5 to +0.3 -2.0 to +0.3 VSS1 - 0.3 to +0.3 VSSL - 0.3 to +0.3 VSS1 - 0.3 to +0.3 VSS2 - 0.3 to +0.3 VSS3 - 0.3 to +0.3 VSSL - 0.3 to +0.3 -55 to +150 Unit V V V V V V V V V V C
RECOMMENDED OPERATING CONDITIONS
1.5 V Spec. (MSM64152A)
(VDD = 0 V) Parameter Operating Temperature Operating Voltage Crystal Oscillation Frequency External RC Oscillator Resistance Symbol Top VSS1 fXT ROS Condition -- BUPF = "0" BUPF = "1" -- -- Range -40 to +70 -1.7 to -1.25 -1.7 to -1.15 30 to 35 1M 10% Unit C V kHz W
11/25
Semiconductor
MSM64152A/64152AL
ELECTRICAL CHARACTERISTICS
1.5 V Spec. (MSM64152A) DC Characteristics
(VDD = 0 V, VSS1 = -1.5 V, Ta = -40 to +70C unless otherwise specified.) Parameter Symbol Condition Ca, Cb, C12 = 0.1 mF +100% -20% Ta = -40 to +60C BUPF = "0" Ca, Cb, C12 = 0.1 mF +100% -20% Ta = -40 to +70C BUPF = "0" Ca, Cb, C12 = 0.1 mF +100% -20% Ta = -40 to +60C BUPF = "1" Ca, Cb, C12 = 0.2 mF +100% -20% Ta = -40 to +70C BUPF = "1" Ca, Cb, C12 = 0.1 mF +100% -20% Ta = -40 to +60C BUPF = "0" Ca, Cb, C12 = 0.1 mF +100% -20% Ta = -40 to +70C BUPF = "0" Ca, Cb, C12 = 0.1 mF +100% Ta = -40 to +60C -20% BUPF = "1" Ca, Cb, C12 = 0.2 mF +100% Ta = -40 to +70C -20% BUPF = "1" BUPF = "0" BUPF = "1" Oscillation start time: within 5 seconds after reset -- -- -- ROS = 1 MW Min. Typ. Max. Unit Measuring Circuit
-3.2 -3.0 -2.8
-3.2 -3.0 -2.7 V -3.2 -3.0 -2.5
VSS2 Voltage
VSS2
-3.2 -3.0 -2.3 1 1' -4.7 -4.5 -4.2
-4.7 -4.5 -4.0 V -4.7 -4.5 -3.9
VSS3 Voltage
VSS3
-4.7 -4.5 -3.7 -1.5 -1.3 -0.6 -1.9 -1.3 -0.6 -- -- 10 10 15 -- -- -- 15 40 -1.45 -1.15 30 20 75
VSSL Voltage Crystal Oscillation Start Voltage Crystal Oscillation Hold Voltage External Crystal Oscillator Capacitance Internal Crystal Oscillator Capacitance RC Oscillation Frequency
VSSL VSTA VHOLD CG CD fCR
V V V 1 pF pF kHz 1'
12/25
Semiconductor DC Characteristics (continued) * 32.768 kHz crystal oscillation
MSM64152A/64152AL
(VDD = 0 V, VSS1 = -1.5 V, Ta = -40 to +70C unless otherwise specified.) Parameter Supply Current 1 Supply Current 1 Supply Current 2 Supply Current 2 Symbol IDD1 IDD1 IDD2 IDD2 Condition CPU is in HALT state BUPF = "0" CPU is in HALT state BUPF = "1" BUPF = "0" BUPF = "1" Min. Typ. Max. Unit 2.0 2.0 3.0 3.0 6.0 6.0 10 10 6.0 40 10 50 15 50 25 60 mA mA mA mA mA mA mA mA 1 Measuring Circuit
Ta = -40 to +40C -- Ta = +40 to +70C -- Ta = -40 to +40C -- Ta = +40 to +70C -- Ta = +40 to +70C -- Ta = +40 to +70C --
CPU is in operation state Ta = -40 to +40C -- CPU is in operation state Ta = -40 to +40C --
* RC oscillation
(VDD = 0 V, VSS1 = -1.5 V, ROS = 1 MW, Ta = -40 to +70C unless otherwise specified.) Parameter Supply Current 1 Supply Current 1 Supply Current 2 Supply Current 2 Symbol IDD1 IDD1 IDD2 IDD2 Condition CPU is in HALT state BUPF = "0" CPU is in HALT state BUPF = "1" BUPF = "0" BUPF = "1" Min. Typ. Max. Unit 3.0 3.0 6.0 6.0 7.0 7.0 15 15 10 45 15 50 20 50 30 70 mA mA mA mA mA mA mA mA 1' Measuring Circuit
Ta = -40 to +40C -- Ta = +40 to +70C -- Ta = -40 to +40C -- Ta = +40 to +70C -- Ta = +40 to +70C -- Ta = +40 to +70C --
CPU is in operation state Ta = -40 to +40C -- CPU is in operation state Ta = -40 to +40C --
13/25
Semiconductor DC Characteristics (continued)
MSM64152A/64152AL
(VDD = 0 V, VSS1 = VSSL = -1.5 V, VSS2 = -3.0 V, VSS3 = -4.5 V, Ta = -40 to +70C unless otherwise specified.) Parameter (Pin Name) Output Current 1 (P4.0 to P4.3) (MD0, MD0) Output Current 2 (SEG0 to SEG25) (COM1 to COM4) Symbol IOH1 IOL1 IOH2 IOMH2 IOMH2S IOML2 IOML2S IOL2 Output Current 3 (P6.0 to P6.3) Output Leakage Current (P6.0 to P6.3) Input Current 1 (P2.0 to P2.3) (P6.0 to P6.3) Input Current 2
(TST1, TST2, TST3)
Condition VOH1 = -0.5 V VOL1 = VSS1 + 0.5 V VOH2 = -0.2 V VOMH2 = VSS1 + 0.2 V VOMH2S = VSS1 - 0.2 V VOML2 = VSS2 + 0.2 V VOML2S = VSS2 - 0.2 V VOL2 = VSS3 + 0.2 V VOH3 = -0.5 V VOL3 = VSS1 + 0.5 V VOH = VDD VOL = VSS1 VIH1 = VDD VIH1 = VDD VIL1 = VSS1 VIH2 = VDD VIL2 = VSS1 VIH3 = VDD VIL3 = VSS1 -- (When pulled down) (In a high-impedance state) (VDD level) (VSS1 level) (VSS1 level) (VSS2 level) (VSS2 level) (VSS3 level)
Min. Typ. Max. Unit -2.0 -0.6 -0.1 0.1 -- 4.0 -- 4.0 -- 4.0 0.1 -- -0.3 1.0 0 -1.0 0.3 -1.0 15 -1.0 -0.3 0.6 -- -- -- -- -- -- 0.7 -- -- 20 -- -- 0.75 -- 40 -- -- 2.0 -4.0 -- -4.0 -- -4.0 -- 2.0 0.3 -- 100 1.0 0 1.5 0 100 0 0 mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA V
Measuring Circuit
2
IOH3 IOL3 IOOH IOOL IIH1 IIH1Z IIL1 IIH2 IIL2 IIH3 IIL3 VIH1
-5.0 -2.1 -0.3
3
Input Current 3 (RESET) Input Voltage 1 (P2.0 to P2.3) (P6.0 to P6.3) (TST1, TST2, TST3) (RESET)
4 VIL1 -- -1.5 -- -1.2 V
14/25
Semiconductor Measuring circuit 1
MSM64152A/64152AL
OSC1 Crystal 32.768 kHz OSC0
VDD CG
MSM64152A
C1 C12 C2
VSSL VDD VSS1 VSS2 VSS3
CL
Ca V A V
Cb V
Ca, Cb, C12 CL CG
: 0.1 to 0.2 mF : 0.1 mF : 15 pF
Measuring circuit 1'
OSC1 ROS OSC0
MSM64152A
C1 C12 C2
VSSL VDD VSS1 VSS2 VSS3
CL
Ca V A V
Cb V
Ca, Cb, C12 CL ROS
: 0.1 to 0.2 mF : 0.1 mF : 1 MW
15/25
Semiconductor Measuring circuit 2
MSM64152A/64152AL
(*2) VIH (*1) VIL A
MSM64152A
VDD
VSS1
VSS2
VSS3
VSSL
Measuring circuit 3
(*3) A
MSM64152A
VDD
VSS1
VSS2
VSS3
VSSL
OUTPUT
INPUT
OUTPUT
INPUT
16/25
Semiconductor Measuring circuit 4
MSM64152A/64152AL
VIH (*3) VIL
MSM64152A
VDD
VSS1
VSS2
VSS3
VSSL
*1 Input logic circuit to determine the specified measuring conditions. *2 Measured at the specified output pins. *3 Measured at the specified input pins.
OUTPUT
INPUT
Waveform Monitoring
17/25
Semiconductor
MSM64152A/64152AL
ABSOLUTE MAXIMUM RATINGS
3.0 V Spec. (MSM64152AL)
(VDD = 0 V) Parameter Power Supply Voltage 1 Power Supply Voltage 2 Power Supply Voltage 3 Power Supply Voltage 4 Input Voltage 1 Input Voltage 2 Output Voltage 1 Output Voltage 2 Output Voltage 3 Storage Temperature Symbol VSS1 VSS2 VSS3 VSSL VIN1 VIN2 VOUT1 VOUT2 VOUT3 TSTG Condition Ta = 25C Ta = 25C Ta = 25C Ta = 25C VSS2 input, Ta = 25C VSSL input,Ta = 25C VSS2 output,Ta = 25C VSS3 output,Ta = 25C VSSL output,Ta = 25C -- Rating -2.0 to +0.3 -4.0 to +0.3 -5.5 to +0.3 -4.0 to +0.3 VSS2 - 0.3 to +0.3 VSSL - 0.3 to +0.3 VSS2 - 0.3 to +0.3 VSS3 - 0.3 to +0.3 VSSL - 0.3 to +0.3 -55 to +150 Unit V V V V V V V V V C
RECOMMENDED OPERATING CONDITIONS
3.0 V Spec. (MSM64152AL)
(VDD = 0 V) Parameter Operating Temperature Operating Voltage Crystal Oscillation Frequency External RC Oscillator Resistance Symbol Top VSS2 fXT ROS Condition -- BUPF = "0" BUPF = "1" -- -- Range -40 to +70 -3.5 to -2.5 -3.5 to -2.0 30 to 66 1 M 10% Unit C V kHz W
18/25
Semiconductor
MSM64152A/64152AL
ELECTRICAL CHARACTERISTICS
3.0 V Spec. (MSM64152AL) DC Characteristics
(VDD = 0 V, VSS2 = -3.0 V, Ta = -40 to +70C unless otherwise specified.) Parameter VSS1 Voltage VSS3 Voltage VSSL Voltage Crystal Oscillation Start Voltage Crystal Oscillation Hold Voltage External Crystal Oscillator Capacitance Internal Crystal Oscillator Capacitance RC Oscillation Frequency Symbol VSS1 VSS3 VSSL VSTA VHOLD CG CD fCR ROS = 1 MW Condition Ca, Cb, C12 = 0.1 mF +100% -20% Ca, Cb, C12 = 0.1 mF +100% -20% BUPF = "0" BUPF = "1" Oscillation start time: within 5 seconds after reset -- -- -- Min. Typ. Max. Unit -1.7 -1.5 -1.3 -4.7 -4.5 -4.2 -1.5 -1.3 -0.6 -1.9 -1.3 -0.6 -- -- 10 10 15 -- -- -- 15 40 -2.5 -2.0 30 20 75 V V V V V 1 pF pF kHz 1' 1 1' Measuring Circuit
19/25
Semiconductor DC Characteristics (continued) * 32.768 kHz crystal oscillation
MSM64152A/64152AL
(VDD = 0 V, VSS2 = -3.0 V, Ta = -40 to +70C unless otherwise specified.) Parameter Supply Current 1 Supply Current 1 Supply Current 2 Supply Current 2 Symbol IDD1 IDD1 IDD2 IDD2 Condition CPU is in HALT state BUPF = "0" CPU is in HALT state BUPF = "1" BUPF = "0" BUPF = "1" Min. Typ. Max. Unit 0.9 0.9 1.5 1.5 3.0 3.0 5.0 5.0 4.5 30 6.0 40 10 40 15 50 mA mA mA mA mA mA mA mA 1 Measuring Circuit
Ta = -40 to +40C -- Ta = +40 to +70C -- Ta = -40 to +40C -- Ta = +40 to +70C -- Ta = +40 to +70C -- Ta = +40 to +70C --
CPU is in operation state Ta = -40 to +40C -- CPU is in operation state Ta = -40 to +40C --
* RC oscillation
(VDD = 0 V, VSS2 = -3.0 V, ROS = 1 MW, Ta = -40 to +70C unless otherwise specified.) Parameter Supply Current 1 Supply Current 1 Supply Current 2 Supply Current 2 Symbol IDD1 IDD1 IDD2 IDD2 Condition CPU is in HALT state BUPF = "0" CPU is in HALT state BUPF = "1" BUPF = "0" BUPF = "1" Min. Typ. Max. Unit 1.5 1.5 3.0 3.0 4.0 4.0 8.0 8.0 6.0 40 10 50 12 50 25 60 mA mA mA mA mA mA mA mA 1' Measuring Circuit
Ta = -40 to +40C -- Ta = +40 to +70C -- Ta = -40 to +40C -- Ta = +40 to +70C -- Ta = +40 to +70C -- Ta = +40 to +70C --
CPU is in operation state Ta = -40 to +40C -- CPU is in operation state Ta = -40 to +40C --
20/25
Semiconductor DC Characteristics (continued)
MSM64152A/64152AL
(VDD = 0 V, VSS1 = VSSL = -1.5 V, VSS2 = -3.0 V, VSS3 = -4.5 V, Ta = -40 to +70C unless otherwise specified.) Parameter (Pin Name) Output Current 1 (P4.0 to P4.3) (MD0, MD0) Output Current 2 (SEG0 to SEG25) (COM1 to COM4) Symbol IOH1 IOL1 IOH2 IOMH2 IOMH2S IOML2 IOML2S IOL2 Output Current 3 (P6.0 to P6.3) Output Leakage Current (P6.0 to P6.3) Input Current 1 (P2.0 to P2.3) (P6.0 to P6.3) Input Current 2
(TST1, TST2, TST3)
Condition VOH1 = -0.5 V VOL1 = VSS2 + 0.5 V VOH2 = -0.2 V VOMH2 = VSS1 + 0.2 V VOMH2S = VSS1 - 0.2 V VOML2 = VSS2 + 0.2 V VOML2S = VSS2 - 0.2 V VOL2 = VSS3 + 0.2 V VOH3 = -0.5 V VOL3 = VSS2 + 0.5 V VOH = VDD VOL = VSS2 VIH1 = VDD VIH1 = VDD VIL1 = VSS2 VIH2 = VDD VIL2 = VSS2 VIH3 = VDD VIL3 = VSS2 -- (When pulled down) (In a high-impedance state) (VDD level) (VSS1 level) (VSS1 level) (VSS2 level) (VSS2 level) (VSS3 level)
Min. Typ. Max. Unit -6.0 -1.8 -0.7 0.7 -- 4.0 -- 4.0 -- 4.0 -18 0.7 -- -0.3 50 0 -1.0 0.75 -1.0 40 -1.0 -0.6 1.8 -- -- -- -- -- -- 1.6 -- -- 100 -- -- 1.5 -- 80 -- -- 6.0 -4.0 -- -4.0 -- -4.0 -- 6.0 0.3 -- 300 1.0 0 3.0 0 200 0 0 mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA V
Measuring Circuit
2
IOH3 IOL3 IOOH IOOL IIH1 IIH1Z IIL1 IIH2 IIL2 IIH3 IIL3 VIH1
-6.0 -2.0
3
Input Current 3 (RESET) Input Voltage 3 (P2.0 to P2.3) (P6.0 to P6.3) (TST1, TST2, TST3) (RESET)
4 VIL1 -- -3.0 -- -2.4 V
21/25
Semiconductor Measuring circuit 1
MSM64152A/64152AL
OSC1 Crystal 32.768 kHz OSC0
VDD CG
MSM64152AL
C1 C12 C2
VSSL VDD VSS2 VSS1 VSS3
CL
Ca V A V
Cb V
Ca, Cb, C12, CL CG
: 0.1 mF : 15 pF
Measuring circuit 1'
OSC1 ROS OSC0
MSM64152AL
C1 C12 C2
VSSL VDD VSS2 VSS1 VSS3
CL
Ca V A V
Cb V
Ca, Cb, C12, CL ROS
: 0.1 mF : 1 MW
22/25
Semiconductor Measuring circuit 2
MSM64152A/64152AL
(*2) VIH (*1) VIL A
MSM64152AL
VDD
VSS1
VSS2
VSS3
VSSL
Measuring circuit 3
(*3) A
OUTPUT
INPUT
MSM64152AL
VDD
VSS1
VSS2
VSS3
VSSL
OUTPUT
INPUT
23/25
Semiconductor Measuring circuit 4
MSM64152A/64152AL
VIH (*3) VIL
MSM64152AL
VDD
VSS1
VSS2
VSS3
VSSL
*1 Input logic circuit to determine the specified measuring conditions. *2 Measured at the specified output pins. *3 Measured at the specified input pins.
OUTPUT
INPUT
Waveform Monitoring
24/25
Semiconductor
MSM64152A/64152AL
PACKAGE DIMENSIONS
(Unit : mm)
QFP60-P-1519-1.00-K
Mirror finish
Package material Lead frame material Pin treatment Solder plate thickness Package weight (g)
Epoxy resin 42 alloy Solder plating 5 mm or more 1.50 TYP.
Notes for Mounting the Surface Mount Type Package The SOP, QFP, TSOP, SOJ, QFJ (PLCC), SHP and BGA are surface mount type packages, which are very susceptible to heat in reflow mounting and humidity absorbed in storage. Therefore, before you perform reflow mounting, contact Oki's responsible sales person for the product name, package name, pin number, package code and desired mounting conditions (reflow method, temperature and times).
25/25

▲Up To Search▲

Price & Availability of MSM64152A

	To Download MSM64152A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .